◆ Light fraction hydrofining catalystTechnical characteristics:1) The catalyst has excellent hydrodesulfurization hydronitrogen removal activities, the content of sulfurnitrogen in hydride is less than 0.5ppm;2) The reaction temperature is about +10°C lower than other similar catalysts.
◆ Diesel hydrofining catalystTechnical characteristics:1) high diesel fraction yield -97-99%;2) The product quality obtained is good: the sulfur content is less than 10ppm,the cetane number of diesel fuel increases by 2-3 points;3) Low chemical hydrogen consumption: 0.5-1.0%.
◆ Diesel hydrodewaxing catalystStandard technical specifications:1) Good hydrodesulfurizationhydrodenitrification activity, sulfur content less than 10ppm, diesel cetane number increased by 1-2 units;2) Good dewaxing activity, the solidification temperature of diesel is reduced by 5-35℃, depending on the set target.
◆ Fixed bed tar hydrogenation catalystStandard technical specifications:1) High hydrogenation activity;2) Good resistance to cokingcontamination.
◆ Fluidized bed tar hydrogenation catalyst
Our catalyst has improved hydrotreatment characteristics, especially improved selectivityconversion rate of asphaltene, suitable for the hydrogenation conversion of heavylow-quality residue oil,is the best choice for fluidized bed hydrotreatment tar process.
◆ Hydrocracking catalyst for light fractionTechnical characteristics:1) High activity, high selectivity for naphtha;2) High nitrogen resistance.
◆ Hydrocracking catalyst for the production of middle fractionTechnical characteristics:1) High activityhigh selectivity of middle fraction;2) Good adaptability to different kinds of feeds.
◆ Catalyst for the production of hydrogenated tail oil with high viscosity indexTechnical characteristics:1) High activity, conversion rate above 70%;2) High viscosity index of unconverted residues - above 137.
Applicable processes: Chevron, AXENS, UOPother processes.
◆ Semi-regenerative reforming catalystTechnical characteristics:1) High-purity alumina is used as the feed preparation carrier;2) The catalyst has excellent catalytic activity, selectivity, stabilityregenerative ability.
◆ Continuous regeneration reforming catalystTechnical characteristics:1) Low coking rate;2) High activityselectivity.
Technical characteristics:
Good adaptability to different types of feeds;
The obtained products are of high qualitythe base oils obtained meet the standards of group II, IIIIII+ base oils.